Rainy days really are productive!
Here is the updated design. If you look at the older design from a few days ago the bridge was one piece. Just for sake of adjusting I am making it a three piece. One bridge and two legs. They will only be 2" or less tall due to space constraints and a screw mounted every 3/4" on the edges. Eight screws all together. This also refects the new drive bay window installed last night. The blue coloreed material is raw plexi glass, of which ironically is covered with a blue film. Until the install is done it will stay and then later be peeled away.
This is the actual unit so far. Cutting all the way to the edges of the disc was really pain staking but worth the effort! The current brindge must be removed to put in a plexi base. Before I do this I will test fit to make sure there is room. If there is expect to see a plexi base being cut and new bridge to replace this flimsy version used for test fitting. Turns out rainy days really can be productive! Thanks for reading.
No comments:
Post a Comment